تخطى إلى المحتوى الرئيسي

المشاركات المكتوبة بواسطة Shayne Oxley

Big chief : Preheating and Connecting the Battery

Big chief : Preheating and Connecting the Battery

Using a big chief thc vape cartridge for big chief raspberry runtz the first time is not always intuitive. Below are some simple and clear step-by-step instructions to get you started big chief on the go quad pod how to use and prime a vape cartridge, and to help you avoid many common beginner mistakes.

120px-Big_Chief_Monk_Boudreux_on_Super_Sunday_2015.jpgStep One: big chief raspberry runtz Unpackage and Prime the Vape Cartridge

To start, remove the cart from its packaging and take off the white rubber covers big chief on the go quad pod either end. There should be one cover big chief on the go quad pod the mouthpiece, and another at the base over the coil.

With these pieces removed, if your cart is working correctly, the oil should seep into the bottom of the chamber and surround the coil. This means it is ready to be primed.

Priming

To prime your cart, inhale from the mouthpiece several times. There should be no vapor, big chief hemp pre rolls only air, big chief on the go quad pod and the cart should not be attached to a battery. Take between 5-8 "dry hits" in this way, pulling air through the chamber and up into your mouth.

Next, big chief cannabis rub the cart between your palms quickly to loosen the oil. If the oil remains above the chamber, simply continue both priming steps until corrected.

Users often overlook the priming process, but it helps prepare the cart for use, and will help prevent clogging in the future.

Step Two: Preheating and big chief raspberry runtz Connecting the Battery

With the cart primed, the next step is to preheat it by hand or attach it to a battery and preheat the oil.

Here, please be sure you are using a 510-battery that is fully charged. All 3CHI vape cartridges are designed to be used with a 510-threaded battery. Improper batteries, big chief raspberry runtz including MOD batteries, can easily burn or candyland big chief otherwise damage big chief on the go quad pod cartridges.

Preheating

If your compatible battery does not have a preheat button, big chief on the go quad pod you will need to preheat by hand. This can be done by rubbing the big chief thc cartridge between your palms, or raspberry runtz big chief by gently and carefully using a blowdryer to warm big chief on the go quad pod oil. Set the dryer to low heat and gently move the mouth up and big chief raspberry runtz down the cart from a distance of approximately eight inches.

  • مشاركة