How to Replace a Volvo Replacement Key Fob

Your Volvo key fob can do so more than just unlock and lock your vehicle. It is also an advanced antitheft device that uses special technology to communicate with your car in order to stop theft.

What happens what happens if the battery for your key fob fails? Volvo Cars Mission Viejo's team is equipped with all the answers.

How to unlock your Vehicle

Modern electronic key fobs offer greater convenience and function compared to manual keys. Batteries eventually degrade and will require replacement. If your Volvo keyfob only functions intermittently, your battery might be failing and you'll need to replace it soon.

Fortunately, there are some simple steps you can follow to replace your Volvo key fob battery on your own. Find a clean area to work on. Place all the tools you will need. Find the battery's hatch, and open it using a flathead, coin, or a similar tool. Next, carefully pry the battery from its socket by lifting it up on the side that is closest to the key-ring loop. Make sure you wear rubber gloves to avoid damaging the clips or electronic contact surfaces.

After the battery is removed, place the new battery into its socket. Make sure that the positive side is facing upwards and that it is placed in all the clips. Slide the cover downwards towards the key-ring until it is loose and falls off. Then, you can remove the cover to reveal the mechanical key blade that is hidden within. You can use this to unlock your vehicle from the driver's side in the event that you've lost or damaged your key fob.

How to Start Your Vehicle

Modern vehicles are equipped with key fobs that do more than simply unlock and lock the doors. They also have other useful functions such as summoning or auto parking the vehicle. In fact, the brand new Volvo XC60 can even remotely start your engine using its key fob buttons. How exactly does it work?

Find a clean, flat surface on which you can place the necessary items for this project. Then, lay the fob down on the surface with its Volvo logo facing upward. Next you will need a flathead screwdriver, coin or similar tool to turn the battery hatch back to the open position. Avoid touching the electronic contact surfaces using your tools. This can cause the fob to stop working properly.

When the hatch is opened and the battery is in its socket and make sure it is properly seated with the positive (+) side facing up. Once the clips are locked into place, replace the battery cover, and then reassemble the fob.

By pressing the unlock button only once the alarm will be disengaged and the driver's door will be unlocked. If you press it again it will unlock all doors and the tailgate. The unlock button can also be useful for rolling down the windows to let in fresh, cool air on a hot summer's day. If you'd like more, the keyfob can be used to activate the ERS that will begin the climate control system of the vehicle and allow it to warm or cool the vehicle to the desired temperature levels when the vehicle is parked.

How to replace the battery

If your key fob isn't locking or unlocking your vehicle as it used to, it may be time to replace the battery. The battery can be replaced with a flathead screwdriver, plastic pry bar or other small tools. First, locate the small slot that the backup / emergency key for ignition made of metal used to reside. Use the blade of your screwdriver or pry bar tool into this slot and gently open the back of the fob that holds the key. After the fob is open, locate the CR2032 3V battery and remove it. Replace the battery, Volvo Replacement Key Fob then snap together the fob.

Note: Some older Volvos have a different battery which is the CR2025. CR2025 batteries are 7 tenths of a millimeter less than a CR2032 battery, so you will need to be careful with the placement of the replacement.

Follow these steps to change the battery in your Volvo. Contact Jennings Volkswagen if you have any concerns. Our team of experts is happy to assist. We also have a complete service department to handle any car maintenance or repair you require. Book your appointment now!

How to unlock the Key Blade that is Hidden Key Blade

Keyfobs from Volvo have changed in recent years. The key fobs offer more than just a remote to start and lock your car. They can also open and close the windows and give you an additional boost if you require. First, you must learn to use your key fob to unlock its full potential.

Your key fob is fitted with a transponder, which has been programmed specifically for Volvo Replacement Key Fob your Volvo. When you insert the key fob into the ignition barrel the transponder chip scans the code and compares it with the one stored in the start inhibitor module of your vehicle. If the codes don't match the car won't start. This is a crucial security measure to stop your Volvo from running if the wrong ignition key is used.

If you lose your key, you will need to bring it to a dealership to have it replaced and your car changed. This procedure can take up to 10 days and can cost a lot of money. You can save money by programming your computer. You can find all the information you require in your owner's manual or on the internet. First, remove the logo and non-logo covers from the fob's key and place it on a clean surface. Push the grey button in the upper right corner of your fob. The cover will be opened to reveal the CR2032 3V power source.