تخطى إلى المحتوى الرئيسي

المشاركات المكتوبة بواسطة Dan Chubb

Big chief : Preheating and Connecting the Battery

Big chief : Preheating and Connecting the Battery

Using a big chief vape cartridgebig chief thc cartridge for big chief cartridge the first time is not always intuitive. Below are some simple and clear step-by-step instructions to get you started on how to use and prime a big chief vape cartridgebig chief extracts cartridge, and to help you avoid many common beginner mistakes.

Step One: Unpackage and Prime the Vape big chief thc cartridge

To start, remove the cart from its packaging and big chief on the go quad pod take off the white rubber covers on either end. There should be one cover on the mouthpiece, and another at the base over the coil.

With these pieces removed, big chief weed, if your cart is working correctly, the oil should seep into the bottom of the chamber and surround the coil. This means it is ready to be primed.

Priming

To prime your cart, big chief hemp inhale from the mouthpiece several times. There should be no vapor, only air, and big chief vape cartridge the cart should not be attached to a battery. Take between 5-8 "dry hits" in this way, trainwreck big chief pulling air through the chamber and big chief thc vape up into your mouth.

Next, rub the cart between your palms quickly to loosen the oil. If the oil remains above the chamber, simply continue both priming steps until corrected.

Users often overlook the priming process, but it helps prepare the cart for use, and will help prevent clogging in the future.

Step Two: Preheating and Connecting the Battery

With the cart primed, the next step is to preheat it by hand or attach it to a battery and preheat the oil.

Here, please be sure you are using a 510-battery that is fully charged. All 3CHI big chief vape cartridge cartridges are designed to be used with a 510-threaded battery. Improper batteries, big chief thc vape including MOD batteries, can easily burn or otherwise damage the cartridges.

afrochella-logos-vertical-new+%281%29.pngPreheating

If your compatible battery does not have a preheat button, you will need to preheat by hand. This can be done by rubbing the big chief thc cartridge between your palms, or big chief vape cartridge by gently and big chief on the go quad pod carefully using a blowdryer to warm the oil. Set the dryer to low heat and big chief cartridge gently move the mouth up and down the cart from a distance of approximately eight inches.

  • مشاركة